Bluetooth Module v4.0 (Android&IOS HM-10 BT)

his module Advantages: 1. Internal with logic level conversion circuit. No external 5V level to turn into a 3.3V level 2. Power input with anti-anti-circuits. Avoid accidental power plug reversed, leading to the burning question module. Support for Apple IOS5 / IOS6 system, download the following information before buying. Thank you! HM-10 module data download package : ( Incl IOS5 / 6 development of source code, module AT commands, please to download, thank you!) HM-10 Tutorial: IOS several important points, want customers to use the module before, look at this document! To heart. (Applicable to 4s 5 5s after Apple machines) using the IOS: 1.IOS search for Bluetooth is not set – “Bluetooth search inside and pairing Bluetooth. (Only Bluetooth headset connection within the IOS settings. Unable to find a wireless data device) 2.IOS in search LightBlue software appstore inside, and then open the software to search LightBlue to HM-10, and the pairing and test sending and receiving! ——————————————— Android phones 1. Make sure that Android phones hardware Bluetooth module supports Bluetooth 4.0. (Phone hardware module does not support it, the software do the right Rom!) 2. The system upgrade to 4.3 or later HMBLEComAssistant.rar 3. Information within the package can be used to send and receive test ———————————————— – HM-10 module configuration, you need USB to TTL devices. Wireless pairing can not be configured! (Because the wireless pairing data directly through pass) ———- 1. In the absence of the remote device and the mating connector, LED flash slowly, then you can use AT command module configurations. 2.HM-10 module can only recognize AT commands all uppercase, lowercase, and mixed case does not support the wording. 3. The factory default baud rate is 9600 8n1 from the machine settings AT + BAUD0 AT + NAMEAC AT + PASS000000 AT + TYPE1 AT + ROLE0 Host settings: AT + BAUD0 AT + NAMEAC AT + PASS000000 AT + TYPE1 AT + ROLE1 Weight: 3.2g Size: 46 * 17 * 5mm